HKS CAM PULLEY - Toyota Supra JZA70 / JZA80

HKS CAM PULLEY - Toyota Supra JZA70 / JZA80

Part Number is for both inlet side and exhaust side

NEW version HKS cam pully made from Duralumin + Ni Plating for Toyota

HKS adjustable cam pulleys for Toyota performance vehicles allow you to adjust cam timing to maximize engine performance for various driving conditions. Either with stock or HKS camshafts, adjustments can be done to tune an engine power band to optimum RPM range for a particular application.

Duralumin is alloy of aluminum (over 90%) with copper (about 4%), magnesium (0.5%-1%), and manganese (less than l%). Before a final heat treatment the alloy is ductile and malleable; after heat treatment a reaction between the aluminum and magnesium produces increased hardness and tensile strength. Because of its lightness and other desirable physical properties, duralumin is widely used in the aircraft industry. material of both pulley part of an outer, and an inner plate portion to realize super-lightweight body.

Vehicles Produced Between: ~
Engine Type: 1/2JZ-GTE
Part No: 22004-AT003  
Model No: JZA70/80

Price is for one. You will require 2, one for inlet and one for exhaust side.

Note:
*These products cannot be installed on VVT-i camshaft side.

Part No. 22004-AT003